EPSON Imaging Technology Center Page: 67
Revision: 1 10/6/00
6.41 Enter Remote Mode ESC "(R" 08H 00H 00H "REMOTE1
Format:
ASCII ESC ( R 08H 00H 00H R E M O T E 1
Hex 1B 28 52 08 00 00 52 45 4D 4F 54 45 31
Decimal 27 40 82 8 0 0 82 69 77 79 84 69 49
Function:
* The present emulation mode is terminated, and enter remote mode.
* The remote mode is continued until the remote mode terminate command is
received.
* Print data present in the buffer at the time point that this command is received is
printed before enter the remote mode.
* In the remote mode, following XX [nL] [nH] [00H] [m1] ... [mx] type control
codes are available.
Change Printer Settings : XX [nL] [nH] [00H] [m1] ... [mx]
XX is a string of 2 ASCII characters defining a feature of this command.
[nL] [nH] is 2 byte hexadecimal value that denotes the length of the [00H]
and [m1] ... [mx] parameters. [m1] ... [mx] parameters is used to describe
detailed command function and represent printer settings.
* This command is only valid in text mode.
