MMB Web-UI (Web User Interface) Operations
not satisfy requirements of Mirror Mode.
Unable to set the specified SB to the partition due to CPU composition abnormal.
Unable to register the specified SB#%s as a Reserved SB due to the home SB is
TPM enabled.
Unable to register the specified SB#%d as a Reserved SB due to Partition is Fixed
I/O Mode.
Unable to register the specified SB#%d as a Reserved SB due to abnormal DIMM
composition.
The DIMM does not satisfy requirements of Mirror Mode.
If you register the specified SB%s as a Reserved SB, Mirror Mode will be disabled
when switching to specified SB.
Are you sure to continue?
Unable to register the specified SB#%d as a Reserved SB due to abnormal SB
composition.
Unable to register the specified SB#%d as a Reserved SB due to abnormal VRM
composition.
For details on the messages displayed on the window, see PRIMEQUEST 2000 Series Message Reference
(C122-E178EN).
When multiple errors are detected, multiple errors are displayed in the dialogue box.
1.3.6 [Power Management Setup] Window
In the [Power Management Setup] window, Power Saving can be set in the partition unit.
Power Saving can be set only when the Power save Control as system is Enable.
When the System Power Save setting is Disable, then the display of this screen is shown as gray and
cannot be set.
FIGURE 1.51 [Power Management Setup] window
