MMB CLI (Command Line Interface) Operations
Sets whether to enable https service.
Sets whether to enable ssh service.
Sets whether to enable telnet service.
Displays the http service enabling setting.
Displays the https service enabling setting.
Displays the ssh service enabling setting.
Displays the telnet service enabling setting.
Sets the http port number.
Sets the https port number.
Sets the ssh port number.
Sets the telnet port number.
Displays the http port number.
Displays the https port number.
Displays the ssh port number.
Displays the telnet port number.
Clears the access control setting.
Displays the access control setting.
Clears the SSH public key.
Downloads the SSH public key.
NTP inquiry (ntpq – p executed)
Batch-updates the firmware (new).
MMB configuration and other
Command termination code display
Displays the termination code for the last command
executed.
Firmware revision status/version check
Displays the batch firmware update progress.
Displays a list of network routes.
Displays the physical Ethernet address.
Displays the physical Ethernet address.
Displays the network environment setup status.
Displays a list of port numbers being used.
Displays the REMCS network setting.
