MMB CLI (Command Line Interface) Operations
Privilege: Administrator
(1) Input format
show user_list
(2) Option
None
(3) Usage example
#
show user_list
user_name privilege
Aaaaaaaa Admin
Cccccccccc Operator
Dddddddd CE
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
2.6.15 console
Login to the system by telnet. Execute the Text Console connection of BMC.
The Text Console connection to BMC can be connected only by one command per BMC. However, the
following messages are displayed when the following console command is executed when other users have
already executed the console command, and the Text Console connection to BMC can be done compulsorily
by inputting as 'Y'. In that case, the compulsion cutting is done as for the console command under the
connection.
Console redirection already in use
If needed, the current user can be disconnected
Do you really want to force disconnect current user? [Y|N]:
Privilege: Administrator, Operator, CE
(1) Input format
console {<timeout>} {quite}
(2) Option
timeout: Sets timeout value.
Set by 0 or within the range of 1~120 minutes.
0 consists of the special meaning, it indicates no Timeout.
Default setting is 10 minutes.
Perform the operation by default value when this option is not specified.
quiet: Executes the command without interactive operation with User.
(3) Usage example
Example: In case of Login to BMC.
# console
