MMB Web-UI (Web User Interface) Operations
Sets the port number used for HTTPS.
Sets the length of time before a time-out due to no input causes the termination of an
HTTP or HTTPS connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Sets Enable or Disable for Telnet.
Sets the port number used for Telnet.
Sets the length of time before a time-out due to no input causes the termination of a
Telnet connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Sets Enable or Disable for SSH.
Sets the port number used for SSH.
Sets the length of time before the SSH connection is timed out.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Sets Enable or Disable for SNMP Agent.
Sets the port number used for SNMP Agent.
The specifiable port numbers are 161 and integers from 1024 to 65535.
Sets Enable or Disable for SNMP Trap.
Sets the port number used for SNMP Trap.
The specifiable port numbers are 162 and integers from 1024 to 65535.
Remarks
To set HTTPS to [Enable], a valid SSL certificate must be registered.
If you set HTTPS to [Enable] when no valid SSL certificate has been registered, an error message appears.
TABLE 1.99 Buttons in the [Network Protocols] window
Sets the specified information.
Cancel Restores the original information and does not set the specified information, such as port
numbers and the time-out time.
(1) Menu Operation
[Network Configuration] - [Network Protocols]
(2) Window Operations
