MMB Web-UI (Web User Interface) Operations
FIGURE 1.75 [SNMP Trap] window
TABLE 1.104 Setting and display items in the [SNMP Trap] window
Sets the SNMP community string for SNMP v1 and v2.
Alternatively, it sets the user name for SNMP v3.
Sets the IPv4 or IPv6 IP address of the trap destination.
Sets the SNMP version. (1, 2, 3)
Sets the security level.
You can specify this only if [3] is selected in [SNMP Version].
noauth: Do not use the authentication function.
auth: Use the authentication function.
priv: Use the authentication function and "privacy" function (data encryption).
With [1] or [2] selected for [SNMP Version], this item is grayed out and disabled. In
this case, the available security level will be only noauth.
Sets the hash function to encrypt passwords.
MD5
SHA
This item takes effect only if [3] is selected for [SNMP Version]. With [1] or [2]
selected for [SNMP Version], this item is grayed out and disabled.
Sets a passphrase for authentication.
This item takes effect only if [3] is selected for [SNMP Version] and [auth] or [priv] is
Sets a passphrase for encryption.
This item takes effect only if [3] is selected for [SNMP Version] and [priv] is selected
