A SERVICE OF

logo

Open as PDF
next previous
GPSMAP 5000 Series Owner’s Manual 27
Where to
Where to
2. If necessary, touch and drag the screen until the route’s starting point is displayed. Touch the
route’s starting point. The starting point is indicated by the pointer .
3. Touch Add Turn.
4. Touch the location of the rst turn. Repeat until the route is complete.
5. Touch Done.
To create a route using Auto Guidance:
Auto Guidance is available with a preprogrammed BlueChart g2 Vision SD card.
1. From the Navigation chart, touch your destination.
2. Touch Navigate To > Guide To. Your route is calculated.
NOTE: To change the auto guidance path to a route, touch the end of the path and then touch
Navigate To > Route To. The auto guidance path stays on the screen, allowing you to trace it while
creating a route.
To edit or delete a route:
1. From the Home screen, touch Information > User Data > Routes.