Chapter 16-RMX Manager Application
16-16
2 Define the following parameters:
Table 2 MCU Properties
Field Description
MCU Name Enter the name of the MCU on the network.
MCU IP Enter the IP address of the MCU’s Control Unit. The IP
address must be identical to the one configured in the
MCU during first entry Configuration. For more details,
see the RMX 2000/4000 Getting Started Guide,
"Modifying the Factory Default Management Network
Settings on the USB Key” on page 2-7.
Port Enter the number of the port used for communication
and data transactions between the RMX unit and the
RMX Manager.
For standard connection, enter 80.
For a Secured connection (using TLS or SSL), enter
443.
Username Enter the user name with which you will login to the
MCU. A User with this name must be defined in the
RMX Users list. The system is shipped with a default
User whose name is POLYCOM.
Password Enter the password as defined for the user name with
which you will login to the MCU. The system is shipped
with a default User whose password is POLYCOM.
Secure Mode Optional. Select this check box to connect to the RMX
with SSL and work in Secure Mode.
