Chapter 2-Additional Conferencing Information
2-56
6 There are two methods to define the dialing string:
A Using the MCU’s IP Address and the Alias string.
B Using only the Alias string (requires a gatekeeper).
Method A (If no gatekeeper is used):
In the IP Address field, enter the IP address of the Signaling Host of
the MCU hosting the destination
conference (in the example,
MCU B).
In the Alias Name/Type field, enter the ID of the cascade-enabled Entry
Queue (EQ), the Conference ID and Password of the destination
conference (MCU B) as follows:
EQ ID#Destination Conference ID#Password (Password is optional).
Method B (Using a gatekeeper):
In the Alias Name field, enter the Prefix of MCU B, EQ ID, Destination
Conference ID, and Password, as follows:
MCU Prefix EQ ID#Conference ID#Password (Password is optional)
7 Click the Advanced tab.
For Example: 78485#24006#1234
Cascade-enabled
EQ ID
Destination
Conference ID
Password (optional)
For Example: 92578485#24006#1234
Cascade-enabled
EQ ID
Conference ID
Password (optional)MCU Prefix as
registered in the
gatekeeper
