Polycom RMX 2000 Administrator’s Guide
17-23
H323_FREE_VIDEO
_RESOURCES
For use in the Avaya Environment.
In the Avaya Environment there are features
that involve converting undefined dial-in
participants’ connections from video to audio
(or vice versa). To ensure that the participants’
video resources remain available for them,
and are not released for use by Audio Only
calls, set this flag to NO.
If set to YES, the RMX will release video
resources for Audio Only calls.
Default: YES.
H245_TUNNELING For use in the Avaya Environment.
This flag is defined in the System Flags –
CS_MODULE_PARAMETERS section.
In the Avaya Environment, set the flag to YES
to ensure that H.245 is tunneled through
H.225. Both H.245 and H.225 will use the
same signaling port.
Default: NO.
H239_FORCE_
CAPABILITIES
When the flag is set to NO, the RMX only
verifies that the endpoint supports the Content
protocols: Up to H.264 or H.263.
When set to YES, the RMX checks frame rate,
resolution and all other parameters of the
Content mode as declared by an endpoint
before receiving or transmitting content.
Default: NO.
Table 17-3 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description
