Chapter 17-RMX Administration and Utilities
17-52
Once the endpoint connects to the conference, its type is identified by the
RMX and, if applicable, the RMX will connect it using one CIF resource,
even if a higher resolution can be used.
To force CIF resource:
1 On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the MCMS_PARAMETERS tab
, click the New Flag button.
The New Flag dialog box is displayed.
3 In the New Flag field enter the flag name:
FORCE_CIF_PORT_ALLOCATION
4 In the Value field enter the product type to which the CIF resource
should be allocated. Possible values are:
— CMA Desktop for CMA desktop client
— VSX nnnn where nnnn represents the model number for
example, VSX 8000.
You can define several endpoint types, listing them one after the
other separated by semicolon (;).
For example, CMA Desktop;VSX 8000.
5 Click OK.
The new flag is added to the flags list.
Reset the MCU for changes to take effect. For more details, see RMX 2000/
4000 Administrator’s Guide, "Resetting the RMX” on page 16-107.
To cancel the forcing of CIF resource:
1 On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the
MCMS_PARAMETERS tab, double-click or select the flag
FORCE_CIF_PORT_ALLOCATION and click the Edit Flag button.
3 In the New Value field, clear the value entries.
4 Click OK.
