-101-
3.6.3.1 L2TP/PPTP Tunnel
On this page, you can configure the L2TP/PPTP VPN.
Choose the menu VPN→L2TP/PPTP→L2TP/PPTP Tunnel to load the following page.
Figure 3-67 L2TP/PPTP Tunnel
The following items are displayed on this screen:
General
Enable VPN-to-Internet:
Specify whether to enable VPN-to-Internet function. If enabled, the
VPN client is permitted to access the LAN of the server and Internet.
Hello Interval:
Specify the interval to send hello packets.
L2TP/PPTP Tunnel
Protocol:
Select the protocol for VPN tunnel. Options include L2TP and PPTP.
Mode:
Specify the working mode for this Router. Options include:
Client: In this mode, the device sends a request to the remote
L2TP/PPTP server initiatively for establishing a tunnel.
Server: In this mode, the Router responds the request from the
remote client for establishing a tunnel.
