-48-
Choose the menu Wireless→Wireless Setting→WDS to load the following page.
Figure
3-26 WDS Configuration
General
WDS:
Enable or disable the WDS function. With this function, the Router can
bridge two or more WLANs.
Scan:
Click this button; you can search the AP which runs in the current
channel.
Parameter
SSID(to be bridged):
The SSID of the AP your Router is going to connect to as a client. You
can also use the search function to select the SSID to join.
BSSID(to be bridged):
The BSSID of the AP your Router is going to connect to as a client. You
can also use the search function to select the BSSID to join.
Key Type:
This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type
WEP Key Index:
This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the index of the WEP key.
Auth Type:
This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the authorization type of the Root AP.
