-127-
dial-up status.
Mode:
Detect automatically or Manually. In Auto mode, gateway will be
selected as destination for PING detection, DNS server of WAN
port will be selected as destination for DNS Lookup. In Manual
Mode, you can configure the destination for PING and DNS
Lookup manually.
Ping:
Enter the destination IP for Ping in Manual mode. 0.0.0.0 means
PING detection is disabled.
DNS Lookup:
Enter the IP address of DNS server in Manual mode. 0.0.0.0
means DNS Lookup is disabled.
List of WAN status
Port:
Displays the detected WAN port.
Detection:
Displays whether the Online Detection is enabled.
WAN Status:
Display the detecting results.
3.8.6 Time
System Time is the time displayed while the Router is running. On this page you can configure the
system time and the settings here will be used for other time-based functions like Access Rule, PPPoE
and Logs.
Choose the menu Maintenance→Time→Time to load the following page.
Figure 3-93 Time
The following items are displayed on this screen:
