-119-
The following items are displayed on this screen:
General
Web Management Port:
Enter the Web Management Port for the Router.
Telnet Management Port:
Enter the Telnet Management Port for the Router.
Web Idle Timeout:
Enter a timeout period that the Router will log you out of the
Web-based Utility after a specified period (Web Idle
Timeout) of inactivity.
Telnet Idle Timeout:
Enter a timeout period that the Router will log the remote
PCs out of the Web-based Utility after a specified period
(Telnet Idle Timeout) of inactivity.
Note:
● The default Web Management Port is 80. If the port is changed, you should type in the new
address, such as http://192.168.0.1:XX (“XX” is the new management port number). E.g: If the
Web Management Port is changed to 88, type http://192.168.0.1:88 in the address filed to login
the Router.
● The new timeout period will take effect when next login.
3.8.1.3 Remote Management
On this page you can configure the Remote Management function. This feature allows managing your
Router from a remote location via the Internet.
Choose the menu Maintenance→Setup→Remote Management to load the following page.
Figure 3-83 Remote Management
The following items are displayed on this screen:
Remote Management
