-126-
3.8
Ping
Destination IP/Domain:
Enter destination IP address or Domain name here. Then select a
port for testing, if you select “Auto”, the Router will select the
interface of destination automatically. After clicking <Start> button,
the Router will send Ping packets to test the network connectivity
and reachability of the host and the results will be displayed in the
box below.
Tracert
Destination IP/Domain:
Enter destination IP address or Domain name here. Then select a
port for testing, if Auto is selected, the Router will select the
interface of destination automatically. After clicking the <Start>
button, the Router will send Tracert packets to test the connectivity
of the gateways during the journey from the source to destination
of the test data and the results will be displayed in the box below.
.5.2 Online Detection
On this page, you can detect the WAN port is online or not.
Choose the menu Maintenance→Diagnostics→Online Detection to load the following page.
Figure 3-92 Online Detection
The following items are displayed on this screen:
General
Port:
Select the port to be detected.
Detecting:
Activate or inactivate Online Detection function. When Online
Detection is active, WAN status will depend on the result of both
PING and DNS Lookup. When Online Detection is inactive, WAN
status will be detected according to physical connection status and
