-23-
MTU:
MTU (Maximum Transmission Unit) is the maximum data unit
transmitted by the physical network. It can be set in the range of
576-1460. The default MTU is 1460. It is recommended to keep
the default value if no other MTU value is provided by your ISP.
Active Mode:
You can select the proper Active mode according to your need.
Manual: Select this option to manually activate or terminate
the Internet connection by the <Connect> or <Disconnect>
button. It’s optimum for the dial-up connection charged on
time.
Always-on: Select this option to keep the connection always
on. The connection can be re-established automatically
when it is down.
Secondary Connection:
Here allows you to configure the secondary connection.
Dynamic IP and Static IP connection types are provided.
Connection Type:
Select the secondary connection type. Options include Disable,
Dynamic IP and Static IP.
IP Address:
If Static IP is selected, configure the IP address of WAN port. If
Dynamic IP is selected, the IP address of WAN port obtained is
displayed.
Subnet Mask:
If Static IP is selected, configure the subnet mask of WAN port. If
Dynamic IP is select, the subnet mask of WAN port obtained is
displayed.
Default Gateway:
If Static IP is selected, configure the default gateway. If Dynamic
IP is selected, the obtained default gateway is displayed.
Primary DNS/
Secondary DNS:
If Static IP is selected, configure the DNS. If Dynamic IP is
selected, the obtained DNS is displayed.
Upstream Bandwidth:
Specify the bandwidth for transmitting packets on the port.
Downstream Bandwidth:
Specify the bandwidth for receiving packets on the port.
