-38-
Region:
Select your region from the drop-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to
use the wireless function of the Router in a region other than one of those
specified in this field. If your country or region is not listed, please contact
your local government agency for assistance.
Channel:
This field determines which operating frequency will be used. The default
channel is automatic and the Router will choose the best channel
automatically. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
Mode:
Select the desired mode.
11b only - Select if all of your wireless clients are 802.11b.
11g only - Select if all of your wireless clients are 802.11g.
11n only- Select only if all of your wireless clients are 802.11n.
11bg mixed - Select if you are using both 802.11b and 802.11g wireless
clients.
11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n
wireless clients.
Select the desired wireless mode. When 802.11b mode is selected, only
802.11b wireless stations can connect to the Router. When 802.11g mode
is selected, only 802.11g wireless stations can connect to the Router. When
802.11n mode is selected, only 802.11n wireless stations can connect to
the Router. It is strongly recommended that you set the Mode 11bng
mixed, and all of 802.11b, 802.11g and 802.11n wireless stations can
connect to the Router.
Channel Width:
Select the channel width from the drop-down list. The default setting is
automatic, which can adjust the channel width for your clients
automatically.
Wireless Parameter
