-44-
Security:
Specify the security option of the wireless network. If you do not want to use
wireless security, select “Disable Security”, otherwise select one Security
option from the drop-down list. It’s strongly recommended to choose one of
the security options to enable security.
There are three wireless security options supported by the Router:
WPA-PSK/WPA2-PSK, WPA/WPA2 and WEP. It is recommend to choose
WPA-PSK/WPA2-PSK.
The detail information of the three security options will be introduced below.
SSID Broadcast:
Enable or disable the SSID Broadcast. If you enable the SSID Broadcast ,
the Wireless Router will broadcast its name (SSID) on the air.
Guest Network:
Enable or disable the Guest Network. If the Guest Network is enabled, the
hosts in this network cannot communicate with the LAN port or other
SSIDs.
AP Isolation:
This function can isolate wireless stations on your network from each other.
Wireless devices will be able to communicate with the Router but not with
each other.
Enable/Disable this
SSID
Enable or disable this SSID. If you select this option, the host which passed
the validation will be allowed to connect to this SSID; otherwise, the Router
will refuse this host's request.
1) WPA-PSK/WPA2-PSK
It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
Auth Type:
Choose the Auth type of the WPA-PSK/WPA2-PSK security on the
drop-down list. The default setting is Automatic, which can select
WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared key of
WPA) automatically based on the wireless station's capability and request.
