ES-3148 User’s Guide
Chapter 11 Spanning Tree Protocol 111
Figure 47 RSTP: Configuration
The following table describes the labels in this screen.
Table 26 RSTP: Configuration
LABEL DESCRIPTION
Status Click Status to display the RSTP Status screen (see Figure 48 on page 113).
Active Select this check box to activate RSTP. Clear this checkbox to disable RSTP.
Bridge Priority Bridge priority is used in determining the root switch, root port and designated port.
The switch with the highest priority (lowest numeric value) becomes the STP root
switch. If all switches have the same priority, the switch with the lowest MAC
address will then become the root switch. Select a value from the drop-down list
box.
The lower the numeric value you assign, the higher the priority for this bridge.
Bridge Priority determines the root bridge, which in turn determines Hello Time,
Max Age and Forwarding Delay.
