ES-3148 User’s Guide
Chapter 34 Introducing Commands 237
34.10.2 Logging Out
In User or Enable mode, enter the exit or logout command to log out of the CLI. In Config
mode entering
exit takes you out of the Config mode and into Enable mode and entering
logout logs you out of the CLI.
34.11 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User’s Guide for more background
information.
34.11.1 User Mode
The following table describes the commands available for User mode.
Table 84 Command Summary: User Mode
COMMAND DESCRIPTION PRIVILEGE
help
Displays help information. 0
logout
Exits from the CLI. 0
exit
Logs out from the CLI. 0
history
Displays a list of previously command(s) that you
have executed. The switch stores up to 256
commands in history.
0
enable
Accesses Enable (or privileged) mode. See Section
34.11.2 on page 238.
0
show ip
Displays IP related information. 0
hardware-monitor
<C|F>
Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
0
system-information
Displays general system information. 0
ping <IP|host-name>
Sends Ping request to an Ethernet device. 0
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help
Displays command help information. 0
tracerout
e
<ip|host-name>
Determines the path a packet takes to a device. 0
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a
VLAN.
0
