A SERVICE OF

logo

ES-3148 User’s Guide
Chapter 35 User and Enable Mode Commands 263
CHAPTER 35
User and Enable Mode
Commands
This chapter describes some commands which you can perform in the User and Enable modes.
35.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your switch.
35.2 show Commands
These are the commonly used show commands.
35.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
sysname# show system-info
System Name : ES-3148
System Contact :
System Location :
Ethernet Address : 00:13:49:00:00:02
ZyNOS F/W Version : V3.70(TZ.0)b0 | 7/10/2006
RomRasSize : 2467172
System up Time : 0:47:03 (44ef3 ticks)
Bootbase Version : V0.6 | 07/05/2005
ZyNOS CODE : RAS Jul 10 2006 08:40:31
Product Model : ES-3148