ES-3148 User’s Guide
258 Chapter 34 Introducing Commands
igmp-filtering
profile
Disables IGMP filtering on the port. 13
igmp-group-
limited
Disables IGMP group limitation. 13
ingress-check
Disables ingress checking on the
port(s).
13
gvrp
Disable GVRP on the port(s). 13
flow-control
Disables flow control on the port(s). 13
vlan-trunking
Disables VLAN trunking on the
port(s).
13
mirror
Disables port mirroring on the
port(s).
13
bandwidth-limit
Disables bandwidth limit on the
port(s).
13
broadcast-limit
Disables broadcast storm control
limit on the switch.
13
multicast-limit
Disables multicast limit on the
switch.
13
dlf-limit
Disables destination lookup failure
(DLF) limit on the switch.
13
inactive
Enables the port(s) on the switch. 13
intrusion-lock
Disables intrusion-lock on a port so
that a port can be connected again
after you disconnected the cable.
13
ge-spq
<q0|q1|...|q7>
Disables strict priority queuing on
the Gigabit ports.
13
inactive
Disables the specified port(s) on
the switch.
13
help
Displays a description of the
interface port-channel commands.
13
vlan-stacking
role
<normal|access|
tunnel>
Sets the VLAN stacking port roles
of the specified interface.
13
vlan-stacking
SPVID <1-4094>
Sets the service provider VID of
the specified interface.
13
vlan-stacking
priority <0-7>
Sets the priority of the specified
interface in VLAN stacking.
13
exit
Exits from the interface port-
channel command mode.
13
intrusion-lock
Enables intrusion lock on a port
and a port cannot be connected
again after you disconnected the
cable.
13
test
Performs an interface loopback
test.
13
Table 87 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
