ES-3148 User’s Guide
244 Chapter 34 Introducing Commands
mac-forward mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
13
mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
13
mac-filter mac <mac-addr>
vlan <vlan-id>
inactive
Enables the specified MAC-filter
rule.
13
mac <mac-addr>
vlan <vlan-id>
Disables the specified MAC filter
rule.
13
mirror-port
Disables port mirroring on the
switch.
13
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
13
trunk <T1|T2|T3|T4|T
5|T6>
Disables the specified trunk
group.
13
<T1|T2|T3|T4|T
5|T6> lacp
Disables LACP in the specified
trunk group.
13
<T1|T2|T3|T4|T
5|T6>
interface
<port-list>
Removes ports from the specified
trunk group.
13
bcp-transparency
Disables Bridge Control Protocol
(BCP) transparency.
13
storm-control
Disables broadcast storm control. 13
bandwidth-
control
Disable bandwidth control on the
switch.
13
vlan1q gvrp
Disables GVRP on the switch. 13
port-isolation
Disables port isolation. 13
spanning-tree
Disables STP. 13
<port-list>
Disables STP on listed ports. 13
mrstp <treeIndex>
Disables the specified STP
configuration (tree 1-6).
13
mrstp interface
<port-list>
Disables the STP assignment
from the specified port(s).
13
timesync
Disables timeserver settings. 13
radius-server <index>
Disables the use of authentication
from the specified RADIUS
server.
13
Table 86 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
