ES-3148 User’s Guide
238 Chapter 34 Introducing Commands
34.11.2 Enable Mode
The following table describes the commands available for Enable mode.
help
Displays command help information. 0
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the specified SSH
version.
0
Table 84 Command Summary: User Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 85 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
help
Displays help information. 13
logout
Exits Enable (or privileged) mode. 13
exit
Exits Enable (or privileged) mode. 13
history
Displays a list of command(s) that
you have previously executed.
13
enable
Accesses Enable (or privileged)
mode.
13
disable
Exits Enable (or privileged) mode. 13
configure
Accesses Configuration mode.
See Section 34.11.3 on page 243.
13
stk-port-
test
Tests stack port list. 13
no logging
Clears system logs. 13
arp
Flushes the ARP (Address
Resolution Protocol) table.
13
interface <port-
number>
Clears the interface status of the
specified port(s).
13
show ip
Displays IP related information. 13
arp
Displays the ARP table. 13
tcp
Displays TCP related information. 13
udp
Displays UDP related information. 13
route
Displays IP routing information. 13
route static
Displays IP static route
information.
13
hardware-monitor
<C|F>
Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F).
13
system-
information
Displays general system
information.
13
vlan1q gvrp
Displays GVRP settings. 13
