ES-3148 User’s Guide
Chapter 34 Introducing Commands 255
34.11.4 interface port-channel Commands
The following table lists the interface port-channel commands in configuration mode.
Use these commands to configure the ports.
option
Allows the switch to add DHCP
relay agent information.
13
information
Allows the switch to add system
name to agent information.
13
diffserv
Enables DiffServ on the switch. 13
dscp <0-63> priority <0-7>
Maps DSCP value with an 802.1p
value.
13
Table 86 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 87 interface port-channel Commands
COMMAND DESCRIPTION PRIVILEGE
interface
port-
channel
<port-
list>
Enables a port or a list of ports for
configuration.
13
weight <wt1>
<wt2> ... <wt8>
Sets the interface to use WFQ
weighting. A weight value of one to
eight is given to each variable from
wt 1 to wt 8.
13
ge-spq <q0|q1|...|q7>
Enables strict priority queuing
starting with the specified queue
and subsequent higher queues on
the Gigabit ports.
13
egress set
<port-list>
Sets the outgoing traffic port list for
a port-based VLAN.
13
igmp-immediate-
leave
Enables IGMP immediate leave on
the port.
13
igmp-filtering
profile <name>
Sets the IGMP filtering profile for
this port.
13
igmp-group-
limited
Limits the number of multicast
groups.
13
igmp-group-
limited number
<number>
Sets the number of multicast
groups this port is allowed to join.
13
