A SERVICE OF

logo

ES-3148 User’s Guide
Chapter 34 Introducing Commands 249
member <mac-
address>
password
<password-str>
Sets the cluster member switch's
hardware MAC address and
password.
13
rcommand <mac-
address>
Logs into a cluster member
switch.
13
classifier <name>
<[ packet-format
<802.3untag|802.
3tag|EtherIIunta
g|EtherIItag> ]
[ priority <0-7>
] [
vlan <vlan-id> ]
[ ethernet-type
<ether-
num|ip|ipx|arp|r
arp|appletalk|de
cnet|sna|netbios
|dlc> ] [
source-mac <src-
mac-addr> ]
[ source-port
<port-num> ]
[ destination-
mac <dest-mac-
addr> ] [
dscp <0-63> ]
[ ip-protocol
<protocol-
num|tcp|udp|icmp
|egp|ospf|rsvp|i
gmp|igp|pim|ipse
c> [establish-
only] ] [
source-ip <src-
ip-addr> [mask-
bits <mask-
bits>] ] [
source-socket
<socket-num> ]
[ destination-ip
<dest-ip-addr>
[mask-bits
<mask-bits>] ]
[ destination-
socket <socket-
num> ] [
inactive ] >
Configures a classifier. A
classifier groups traffic into data
flows according to specific criteria
such as the source address,
destination address, source port
number, destination port number
or incoming port number.
13
Table 86 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE