ES-3148 User’s Guide
Chapter 34 Introducing Commands 241
session
Displays current HTTPS
session(s).
13
certificate
Displays the HTTPS certificates. 13
key <rsa|dsa>
Displays the HTTPS key. 13
timeout
Displays the HTTPS session
timeout.
13
multi-login
Displays multi-login information 13
plt
Displays Packet Loop Test (PLT). 13
mac-aging-time
Displays MAC learning aging time. 13
cluster
Displays cluster management
status.
13
candidates
Displays cluster candidate
information.
13
member
Displays the MAC address of the
cluster member(s).
13
member mac <mac-
addr>
Displays the status of the cluster
member(s).
13
members config
Displays the configuration of the
cluster member(s).
13
igmp-filtering
profile
Displays IGMP filter profile
settings.
13
igmp-snooping
Displays IGMP snooping settings. 13
multicast
Displays multicast settings. 13
mvr
DIsplays all MVR (Multicast VLAN
Registration) settings.
13
<vlan-id>
DIsplays specified MVR
information.
13
diffserv
Displays DiffServ settings on the
switch.
13
igmp-
flush
Removes all IGMP information. 13
kick tcp <Session ID>
Resets a TCP connection. Use the
show ip tcp command to get
the Session ID.
13
mac-flush
Clears the MAC address table. 13
<port-num>
Removes all learned MAC address
on the specified port(s).
13
erase running-config
Resets to the factory default
settings.
13
interface port-
channel <port-
list>
[bandwidth-
limit...]
Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
Table 85 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
