ES-3148 User’s Guide
Chapter 34 Introducing Commands 247
vlan <1-4094>
Enters the VLAN configuration
mode. See Section 34.11.5 on
page 259 for more information.
13
vlan-type <802.1q|port-
based>
Specifies the VLAN type. 13
igmp-
snooping
Enables IGMP snooping. 13
host-timeout <1-16711450>
Sets the host timeout value. 13
leave-timeout <1-16711450>
Sets the leave timeout value 13
unknown-
multicast-frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
reserved-
multicast-group
<drop|flooding>
Sets how to treat traffic belonging
to reserved multicast groups.
13
8021p-priority <0-7>
Sets the 802.1p priority for
outgoing igmp control packets.
13
igmp-
filtering
Enables IGMP filtering on the
switch.
13
profile <name>
start-address
<ip> end-address
<ip>
Sets the range of multicast
address(es) in a profile.
13
interface port-channel
<port-list>
Enables a port or a list of ports for
configuration. See Section
34.11.4 on page 255 for more
details.
13
spq
Sets the queuing method to SPQ
(Strictly Priority Queuing).
13
wfq
Sets the queuing method to WFQ
(Weighted Fair Queuing).
13
wrr
Sets the queuing method to WRR
(Weighted Round Robin).
13
fe-spq
<q0|q1|..|
q7>
Sets the switch to use SPQ to
service the subsequent queue(s)
after and including the specified
queue for the 10/100 Mbps
Ethernet ports.
13
ip route <ip> <mask>
<next-hop-ip>
Creates a static route. 13
<ip> <mask>
<next-hop-ip>
[metric
<metric>]
[name <name>]
[inactive]
Sets the metric of a static route or
deactivates a static route.
13
Table 86 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
