Filter
Top Products
4400 and 6400 Series User Guide Page 17
IP Office 3.2 15-601074 Issue 11a (30th June 2006)
Diverting/Forwarding Calls
Switching Divert/Forwarding On
4406D+ and TransTalk MDW 9040 users must use short codes to activate these features.
To set the divert all calls (unconditional) number and modes:
1. Press
Menu twice.
2. Press
Next and then press ProgA.
3. Press Divrt. To backspace, press the left-hand display key and set the required divert number, if
required.
4. Press Next.
5. To switch Group (forward hunt group calls) and/or Divrt (forward personal calls) on or off, press
the display keys. When on, a V symbol is shown above the option.
Diverting hunt group calls is only used when Divert All Calls is also on and only works for calls to
circular or linear groups.
6. Press Done and then press
Exit.
To set the divert on busy/no answer number and modes:
1. Press
Menu twice.
2. Press
Next and then press ProgA.
3. Press OnBsy. To backspace, press the left-hand display key and set the required divert number
(if required).
4. Press Next.
5. To switch OnBsy (Forward On Busy On) and/or NoAns (Forward On No Answer On) on or off,
press the display keys. When on, a V symbol is shown above the option.
6. Press Done and then press
Exit.