Filter
Top Products
4400 and 6400 Series User Guide
4400 and 6400 Series User Guide Page 18
IP Office 3.2 15-601074 Issue 11a (30th June 2006)
Call Forwarding
You can forward your calls to another extension. While forwarding your calls, your phone will display a D
in the top-right of the display. If the station that you are forwarding calls to also has forwarding active,
your calls will go to the final destination.
To set call forwarding:
• Press the programmed CFrwd DSS key.
Alternatively:
1. Press
Menu.
2. Press
and Next/Prev to search and then press CFrwd.
3. Set the required divert number. To backspace, pres the left-hand display key. When you have
activated Divert, the forward number is automatically filled in with the Divert number. Press
Done.
4. Press
Exit.
To clear call forwarding:
• Press the programmed CFrwd DSS key.
Alternatively:
1. Press
Menu.
2. To search, press
and Next/Prev and then press CFrwd.
3. Press
Exit.
Send All Calls (Do Not Disturb)
When on, all your callers either hear a busy tone or are diverted to voicemail if installed. The system
administrator can setup a list of exception numbers for you who can still call you during Do Not Disturb.
4406D+ users can activate this feature via a short code or programmed button.
TransTalk MDW 9040 users activate this via a short code.
To switch send all calls on/off:
• Press the programmed SAC DSS key.
Alternatively:
1. Press
Menu.
2. Press
and Next/Prev to search and then press SAC. A V above it indicates it is on.
3. Press
Exit.