Filter
Top Products
8. Web Interface
The following settings are the defaults:
• Meeting room identification info is cleared.
• Language is set to English.
• Custom wallpapers are removed and the default wallpaper is restored.
• Display resolution is set to auto and standby timer is reset to infinity
• Display Identifiers are turned off.
• Hostname and SSID is set to clickshare-serialnumber.
• The SSID is broadcasted
• WiFi password is reset to clickshare.
• The default WiFi channel is set back to frequency 2.4 GHz, channel 6.
• The update history is cleared.
• The table with the associated Buttons is cleared.
• The admin password is reset to admin.
• Debug logging and remote logging are disabled.
How to restore factory defaults
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Configuration (2)..
Image 8-36
Factory defaults
3. Click on Load Default Settings to return to the factory defaults (3).
Alternative way to load default settings
1. With the Base unit switched off, connect a USB keyboard to a USB port at the back side the Base unit.
2. Power up the Base Unit.
Image 8-37
Alternative way
R5900006 CLICKSHARE 04/12/2013 79