Filter
Top Products
Experiencing Multimedia 167
• Review Duration. Set a time length for displaying the captured
image/video on the Review screen before automatically saving
it and returning to the live Camera screen. Select No Limit if
you do not want to impose a time limit. Select No Review to
immediately return to the live Camera screen after capturing.
• Flicker Adjustment. When taking indoor shots, flicker on the
camera screen may be caused by inconsistencies between the
vertical scan rate of the camera display and the flicker frequency
of fluorescent lighting. To reduce flicker, you can change the
flicker adjustment setting to Auto or to the proper frequency
(50Hz or 60Hz) of the country where your device is being used.
• Record with Audio. Select On to record audio with the captured
video clips. This is selected by default. If you select Off and then
capture a video clip, it will have no audio.
• Prefix. Specify how to name captured images and video clips.
When Default is selected, the file name of each new captured file
is set to “IMAGE” or “VIDEO” followed by a sequential number,
for example: IMAGE_001.jpg. You may also choose to name files
using either the current Date or Date & Time as the prefix.
• Counter. By default, the newly captured image or video files are
named with a prefix and some sequential numbers, such as 001,
002, and so on. To reset the numbering to “001” for your captured
files, tap Reset.
• Recording Limit. Specify the maximum time or file size for
recording.
• Template Folder (in Picture Theme mode only). By default,
templates are stored in the \My Documents\Templates folder on
the device’s Main Memory. If you transferred some templates to
a storage card (via File Explorer), set this option to Main + Card
to specify that templates are located in both the main memory
and the storage card.
• Adjust. This option allows you to adjust the camera display
properties, such as Contrast, Saturation, Hue, and Sharpness.