Filter
Top Products
The Direct Push feature works for your device only if it is connected to
a private network (corporate network) that is using Microsoft Exchange
Server with Service Pack 2 (SP2) with Exchange ActiveSync. You
need to perform a full synchronization between your device and the
Exchange Server first before Direct Push can be enabled.
Using Comm Manager to Enable Direct Push
1. On the Today screen, tap the Comm Manager icon ( ).
2. On the Comm Manager screen, tap the Microsoft Direct Push
button. The button will turn to , which indicates
that you will receive e-mail as they arrive.
When the button is in the state, you need to manually
retrieve your e-mail.
Using ActiveSync to Enable Direct Push
1. In ActiveSync on your device, tap Menu > Schedule.
2. Select As items arrive in the Peak times and Off-peak times
boxes.
Note When both the GPRS/EDGE/UMTS/HSDPA and Wi-Fi connections are
turned on at the same time, the Direct Push feature will always opt for
GPRS/EDGE/UMTS/HSDPA, for which you could be charged per your
network operator’s service plan.
Synchronizing Information and Setting Up E-mail Security 63