Kyocera E1100 Cell Phone User Manual


 
32 Take a Picture
6 Camera
Your phone comes with a camera. Before using
your phone’s camera, here are some tips:
You cannot activate the camera while on
an active call or while browsing files in the
media gallery.
Once the camera is active, the home screen
acts as the viewfinder.
If you get a “Low memory” error, check your
resolution and quality compression settings.
If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
Menu settings and options can only be
accessed when the camera is active.
Take a Picture
To take a picture:
1. Activate the camera one of the
following ways:
Press and hold the Camera key.
Select Menu > Camera.
2. Focus on the image using the phone’s display
as a viewfinder. Scroll up or down to zoom in
and out.
3. Take a picture one of the following ways:
Press the OK key.
Press the Camera key.
Select Capture.
The picture is saved to your camera
pictures folder.
4. Select Send to create a multimedia
message or
Erase to delete the picture
from your phone.
You can also send the picture to a Bluetooth
de
vice or a printer.
5. Press the End key to exit camera mode.
Change Camera Options
While in camera mode you can select one
of the following:
Options > Settings displays the
following settings you may set up prior
to taking a picture:
Resolution adjusts the resolution.
Self Timer sets a self timer. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when Multishot mode is activated.
Date/Time places a time stamp on
the picture.
Multishot allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken.
Shutter Sound sets the sound used when
the camera takes a picture.