Filter
Top Products
60 Network
2. Select Menu > Settings > Accessories >
TTY Device.
3. At the notification, select OK.
4. Select one of the following options:
– TTY Off to disable TTY.
– TTY On to enable for TTY devices.
– TTY On + Talk to enable for TTY devices
and voice carry over.
– TTY On + Hear to enable for TTY
devices and hearing carry over.
Note: Yo
u can also enable TTY when you
enter
##889 with your keypad and select TTY.
Set Com Port Speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
Select
Menu > Settings > Accessories >
Com Port Speed and a speed.
Check with your service provider for details.
Enable Hearing Aid
You can use your phone with a T-coil hearing
aid device.
Note: En
able hearing aid feature only when using
the phone with a T-coil hearing aid device.
1. Connect the T-coil hearing aid device to
your phone.
2. Select Menu > Settings > Accessories >
T-coil Hearing Aid.
3. At the notification, select OK.
4. Select Enabled.
Network
Your phone has several settings for how your
phone connects to a network.
Enable Date Mode
Your phone may be able to receive certain data,
depending on the system sending the information.
You cannot receive voice calls while the phone is
in data mode. To receive data, you must connect
the phone to a laptop or PC and switch the phone
from voice mode to data mode.
Note: T
o purchase a cable, visit
www.kyocera-wireless.com/store.
To enable data mode:
Se
lect
Menu > Settings > Network > Data Calls
and one of the following:
•
Voice Only turns data mode off.
•
Data, next call sets the phone to data
mode for the next incoming call or the
next ten minutes.
•
Data, until off sets the phone to data mode
until the phone is turned off.
Enable Privacy Alert
Set your phone to alert you when enhanced digital
CDMA privacy is lost or regained.
Select
Menu > Settings > Network >
Privacy Alert > Enabled.