Filter
Top Products
8 Powering up
2BASIC FUNCTIONS
This section explains basic functionality of your
phone. For more detailed explanations of your
phone’s features, refer to the later chapters.
Powering up
To turn on your phone, press and hold the End
key and wait until the phone display lights up.
To turn off your phone, press and hold the
End
key until the phone turns off.
Making phone calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a while with no
signal, it changes to power save mode. When you
see “Power Save” on your phone’s screen, press
any key to return to normal operating mode.
You can make a phone call in one of the
following ways.
Call using numbers
At the home screen:
1. Enter a phone number.
2. Press the Send key.
Call using contacts
At the home screen:
1. Select Contacts to open your Contacts list.
2. Highlight a contact and press the Send key.
Call using voice commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 62.
Redial a number
At the home screen:
1. Press the Send key once to open your
call history.
2. Highlight a phone number or contact and
press the
Send key.
Note: To redial the last number called, received
or missed, press the
Send key twice.
Answering phone calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller
also appears if it is not restricted. If the number
is stored in your Contacts list, the contact’s
name appears.
82-K6572-1EN.book Page 8 Sunday, June 15, 2008 9:47 PM