Kyocera S4000 Cell Phone User Manual


 
User Guide 1
1GETTING STARTED
Phone battery
Installing the battery
To install the battery:
1. With the back of the
phone facing you,
locate the side notches
at the top of the phone.
2. Slide your fingernail
into one of the notches
to unsnap the back
cover.
3. Place the battery in the
phone casing with the
metal contacts toward
the top of the phone.
4. Fit the bottom of the
back cover into the
shape at the bottom of
the battery well.
5. Press the back cover
until it snaps into place.
Note: To remove the battery, make sure the
phone is turned off.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter
to the jack on the upper
side of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen shows whether the phone is:
Charging (animated icon)
Partially charged
Fully charged
Warning: The battery does not charge if you are
in a call while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
82-K6572-1EN.book Page 1 Sunday, June 15, 2008 9:47 PM