Filter
Top Products
87
01
02
03
04
05
06
07
08
SETTINGS
To receive a fi le:
1 To receive fi les your Bluetooth must be
both On and Visible. See change your
Bluetooth settings below for more
information.
2 A message will prompt you to accept the
fi le from the sender. Touch Yes to receive
the fi le.
3 You will see where the fi le has been saved
and you can choose to View the fi le or
Use as wallpaper. Files will usually be
saved to the relevant folder in My Stuff.
Changing your bluebooth settings:
1 Touch and choose Settings.
2 Choose Bluetooth then Settings.
Make your changes to:
My device visibility - Choose to be
Visible or Hidden.
My device name - Enter a name for your
KU990.
Supported services - Choose how to use
Bluetooth in association with different
services. See Using your phone as
a modem on page 82 or Using
a Bluetooth headset on page 88.
My address - Change your
Bluetooth address.
Pairing with another Bluetooth device
By pairing your KU990 and another device,
you can set up a passcode protected
connection. This means your pairing is
more secure.
1 Check your Bluetooth is On and Visible.
You can change your visibility in the
Settings menu.
2 Touch Paired Devices then New.
3 Your KU990 will search for devices.
When the search is completed Refresh
and Add will appear on screen.
4 Choose the device you want to pair with
and enter the passcode then touch OK.
5 Your phone will then connect to the other
device, on which you should enter the
same passcode.
6 You passcode protected Bluetooth
connection is now ready.