Define an access point for A-GPS
Select Menu > Applications > Location and Positioning > Positioning server >
Access point. Only a packet data internet access point can be used for this service.
Your device asks for the internet access point when GPS is used for the first time.
Hold your device correctly
When using the GPS receiver, make sure you do not cover the antenna with your hand.
Establishing a GPS connection may take from a couple of seconds to several minutes.
Establishing a GPS connection in a vehicle may take longer.
The GPS receiver draws its power from the device battery. Using the GPS receiver
may drain the battery faster.
Tips on creating a GPS connection
Check the satellite signal status
Select Menu > Applications > Location and GPS data > Options > Satellite status.
If your device has found satellites, a bar for each satellite is shown in the satellite info
view. The longer the bar, the stronger the satellite signal. When your device has
received enough data from the satellite signal to calculate your location, the bar
colour changes.
Positioning (GPS) 63