Filter
Top Products
Set your destination
Select Options > Set destination and a
landmark as the destination, or enter the
latitude and longitude coordinates.
Clear the destination
Select Stop navigation
Retrieve position information
You can view the position information
of your current location and an estimate
of the accuracy of the location.
Select Menu > Applications > Location
and GPS data > Positioning.
Save your current location as a
landmark
Select Options > Save position.
Landmarks can be used in other
compatible applications and transferred
between compatible devices.
Trip meter
With the trip meter, you can calculate
the distance, speed, and time of your trip.
Use the trip meter outdoors to receive a
better GPS signal.
Select Menu > Applications > Location
and GPS data > Trip distance.
Start calculating the trip distance
Select Options > Start. The calculated
values remain on the display.
Start a new calculation
Select Options > Reset. This sets the trip
distance and time and average and
maximum speeds to zero.
Set the odometer and total time to
zero
Select Options > Restart.
The trip meter has limited accuracy, and
rounding errors may occur. Accuracy can
also be affected by availability and quality
of GPS signals.
Positioning settings
Positioning settings define the methods,
server, and notation settings used in
positioning.
Select Menu > Applications > Location
and Positioning.
Define positioning methods
Use only the integrated GPS receiver of
your device
Select Integrated GPS.
Use Assisted GPS (A-GPS) to receive
assistance data from a positioning
server
Select Assisted GPS.
Use information from the cellular
network (network service)
Select Network based.
Define positioning server
Define an access point and positioning
server for network-assisted
positioning
Select Positioning server.
This is used for assisted GPS or network-
based positioning. The positioning server
may be preset by your service provider,
and you may not be able to edit the
settings.
© 2010 Nokia. All rights reserved.60