length indicator also shows the
elapsed and remaining time.
10 The location to which the video is
saved
11 GPS signal indicator
After recording a video clip
After you record a video clip, select from
the following options (available only if
you have selected Options > Settings >
Show last captured video > Yes):
Play — Play the video clip you just
recorded.
— Upload the image to a compatible
online album.
Delete — Delete the video clip.
To return to the viewfinder to record a
new video clip, press the capture key.
Camera settings
Still image camera settings
Select Menu > Applications > Camera.
To change the main settings, in image
mode, select Options > Settings and
from the following:
Image quality — Set the resolution. The
higher the image resolution, the more
memory the image consumes.
Show captured image — View the
image after it is captured, or continue
image capturing immediately.
Default image name — Define the
default name for captured images.
Capture tone — Set the tone that sounds
when you capture an image.
Memory in use — Select where to store
your images.
Show GPS info — To add GPS location
coordinates to each image file, select On.
Receiving a GPS signal may take time, or
the signal may not be available.
Auto-rotate images — Select whether
you want images that are captured when
the device is held upright to be rotated
when you open them in Photos.
Restore camera settings — Restore the
camera settings to the default values.
Video settings
Select Menu > Applications > Camera.
To edit the main settings, in video mode,
select Options > Settings and from the
following:
Video quality — Set the quality of the
video. To send a video in a multimedia
message, select Sharing quality. The clip
is recorded in QCIF resolution, in the 3GPP
file format. You may not be able to send
videos saved in the MPEG4 file format in a
multimedia message.
Show GPS info — To automatically add
GPS location coordinates to videos, select
On. Receiving the GPS signal may take
time, or the signal may not be available.
Location information can be attached to
an image or a video if location coordinates
can be determined via network and GPS.
If you share an image or a video which has
location information attached, the
location information is visible to others
that view the image or the video. You can
deactivate geotagging in the camera
settings.
Audio recording — Record sound.
Show last captured video — View the
first frame of the recorded video after the
recording stops. To view the entire video,
select Play
.
Default video name — Enter the default
name for recorded videos.
Memory in use — Select where to store
your videos.
Restore camera settings — Restore the
camera settings to the default values.
© 2010 Nokia. All rights reserved. 71