Filter
Top Products
or Show or hide the viewfinder grid
(images only).
Activate the self-timer (images only).
Activate sequence mode (images
only).
Open . Photos
Image settings:
Select a color effect.
Adjust the white balance. Select the
current lighting conditions. This allows
the camera to reproduce colors more
accurately.
Adjust the exposure compensation
(images only). If you are shooting a dark
subject against a very light background,
such as snow, adjust the exposure to +1 or
+2 to compensate for the background
brightness. For light subjects against a
dark background, use -1 or -2.
Adjust light sensitivity (images only).
Increase the light sensitivity in low light
conditions to avoid too dark images and
blurry images. Increasing the light
sensitivity may also increase the image
noise.
Adjust contrast (images only). Adjust
the difference between the lightest and
darkest parts of the image.
Adjust sharpness (images only).
The screen display changes to match the
settings you define.
The capture settings are shooting-mode
specific. Switching between the modes
does not reset the defined settings.
If you select a new scene, the capture
settings are replaced by the selected
scene. You can change the capture
settings after selecting a scene if needed.
Saving the captured image may take
longer if you change the zoom, lighting or
color settings.
Capture an image
When capturing an image, note the
following:
• Use both hands to keep the camera
steady.
• The quality of a digitally zoomed
image is lower than that of a non-
zoomed image.
• The camera goes into battery saving
mode after about a minute of
inactivity.
• Keep a safe distance when using the
flash. Do not use the flash on people
or animals at close range. Do not cover
the flash while taking a picture.
1 To switch from video mode to image
mode, if necessary, select
> .
2 Press the capture key. Do not move
the device before the image is saved
and the final image displayed.
Capture images with the secondary
camera
1 Select Options > Use secondary
camera.
2 To capture an image, select
. Do
not move the device before the image
is saved and the final image
displayed.
Zoom in or out when capturing an
image
Use the zoom slider.
© 2010 Nokia. All rights reserved. 67