Filter
Top Products
After recording a video clip
After you record a video clip, select from the following
options (available only if you have selected Options >
Settings > Show last captured video > Yes):
Play — Play the video clip you just recorded.
— Upload the image to a compatible online album.
Delete — Delete the video clip.
To return to the viewfinder to record a new video clip, press
the capture key.
Camera settings
Still image camera settings
To change the main settings, in image mode, select
Options > Settings and from the following:
Image quality — Set the resolution. The higher the image
resolution, the more memory the image consumes.
Show captured image — View the image after it is
captured, or continue image capturing immediately.
Default image name — Define the default name for
captured images.
Capture tone — Set the tone that sounds when you capture
an image.
Memory in use — Select where to store your images.
Show GPS info — To add GPS location coordinates to each
image file, select On. Receiving a GPS signal may take time,
or the signal may not be available.
Auto-rotate images — Select whether you want images
that are captured when the device is held upright to be
rotated when you open them in Photos.
Restore camera settings — Restore the camera settings to
the default values.
Video settings
To change the main settings, in video mode, select
Options > Settings and from the following:
Video quality — Set the quality of the video clip. Select
Sharing, if you want to send the video clip using a
multimedia message. The clip is recorded with QCIF
resolution, in the 3GPP file format, and the size is limited to
600 kB (approximately one minute). You may not be able to
send video clips saved in the MPEG4 file format in a
multimedia message.
Show GPS info — To add GPS location coordinates to each
file, select On. Receiving the GPS signal may take time, or the
signal may not be available.
Audio recording — Record sound.
Show last captured video — View the first frame of the
recorded video clip after the recording stops. To view the
entire video clip, select Play
.
Default video name — Enter the default name for recorded
video clips.
Memory in use — Select where to store your video clips.
Restore camera settings — Restore the camera settings to
the default values.
© 2009 Nokia. All rights reserved. 103