Filter
Top Products
Nokia 6651 User Guide 63 Copyright © 2004 Nokia
You can create your own tones using the Nokia Sound Converter or Nokia
PC Composer application included in the Nokia PC Suite software. See
page 6.
Enhancement settings
You can define the settings that the phone uses by default when it is
connected to a compatible headset, car kit, or inductive loopset. This
menu is shown only if the phone has been connected to one of these
accessories at least once.
To access this menu, press Menu in standby mode, and select Settings and
Enhancement settings.
Select Headset, Handsfree or Loopset, if the corresponding accessory has
been used with the phone. Select
• Default profile to select the profile that is automatically activated
when you connect the selected accessory to the phone. You can select
another profile while the accessory is connected.
• Automatic answer to set the phone to automatically answer an
incoming call after five seconds. If Incoming call alert is set to Beep
once or Off, automatic answer cannot be used.
• Lights to set the lights permanently on (On) or to remain on for 15
seconds after a keypress (Automatic). This setting is available only
when Handsfree is selected.
Security settings
To access this menu, press Menu in standby mode, and select Settings and
Security settings.
When security features that restrict calls are in use (call restrictions,
closed user group, and fixed dialing), calls still may be possible to the
official emergency number programmed into your phone.
Press Menu, and select Settings and Security settings. Select
• Code in use to set the phone to use the UPIN or PIN code. The UPIN
code option is shown only if a USIM card is inserted into the phone.
• PIN code request (or UPIN code request, depending on the Code in use
setting) to set the phone to ask for the PIN code of the SIM card (or
the UPIN code of the USIM card) when the phone is switched on.
Some cards do not allow this setting to be changed.