Filter
Top Products
10
EN
You will need to register your handset if it shows UNREGISTERED in the display or if you wish to register
the handset to a different base unit. You can register up to 4 handsets on a single base, and you can register a
handset to 4 bases.
To register your handset :
1. Press .
If your handset displays UNREGISTERED, go to step 5.
2. Select ADVANCED SET and press
.
3. Select REGISTRATION and press
.
4. Before you enter the PIN code, press and hold the PAGING key on the base for 4 seconds until
a registration tone is emitted. The base is now in the registration mode. (If the base is full and cannot take
on any more handset, it will emit a reject tone instead. See “Un-registering a handset”, page 26 to delete
a currently registered handset.)
5. Enter the PIN code (default: 0000) and press
.
6. Select a base station using the digit keys 1, 2 , 3 or 4. A blinking digit indicates that the base number is
already used.
You will hear a confirmation tone if the registration is successful. If the registration failed, follow the procedure
and try again.
From standby, press to enter the menu.
Use UP/DOWN to go up or down in the menu list.
Press Softkey to confirm the selection.
Press Softkey to exit the menu or to go back to the previous menu
level.
Using the menus
Registering your handset