Filter
Top Products
27
EN
Lock keypad
Keypad can be locked to prevent accidental key press.
When the keypad is locked, you can still answer an incoming call by pressing . During the call, the keypad
is active. When the call is ended, the keypad will be locked again.
To lock and unlock the keypad,
Long press to lock or unlock the keypad.
When locked, LOCKED appears on the display.
Shortcut for turning handset ringer on/off
You can use this shortcut to turn on/off the handset ringer.
Long press .
Message waiting indication
If you have subscribed to the voicemail service from your local service provider, turns on when you have
a new message in your mailbox. After you’ve listened to all the new messages, will turn off.
You can also turn it off by long press during standby.
Paging
You can locate the handsets by using this feature.
Press on the base.
All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays
PA GI NG .
Caller ID first ring suppression
If you have subscribed for Caller ID service by your operator, your phone will suppress the first ring before the
CID. After resetting, first ring suppression will be deactivated. Your phone will automatically detect if CID
service is subscribed after the first call. If CID service is detected, your phone will start suppressing the first
ring after the first call.
Note : appears to indicate the ringer is turned off. The handset will not emit any sound for any
incoming call. Only the handset backlight will turn on to inform you about an incoming call.
Note : You can stop the paging by pressing any key on each handset or pressing on the base
again.
Note : Once first ring suppression is activated, the first ring before CID will be suppressed even after
you have unsubscribed the CID service. If you have unsubscribed the CID service and do not wish to
have the first ring suppressed, please reset the power of the base by disconnecting and re-connecting
the power supply.
Additional features