Filter
Top Products
4
EN
For your safety
Before installing your CD 235, carefully read the following information.
Power requirements
>
The product requires an electrical supply of 220-240 volts, alternating monophased power, excluding IT
installations defined in standard EN60-950. In case of power failure, the communication can be lost.
Telephone connection
>
Always use the line cable provided with the product otherwise you may not have a dialling tone.
>
If you have a broadband DSL Internet connection, please make sure you have one DSL filter plugged
directly on each line socket used in the house and check the modem and the phone are plugged in the
correct filter slot (one specific for each).
Need help?
For more information on troubleshooting and FAQ’s:
Online help: www.p4c.philips.com
Troubleshooting : see page 36
Warning ! The electrical network is classified as hazardous according to criteria in the standard
EN 60950. The only way to power down this product is to unplug the power supply unit from the
electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily
accessible.
Important information