Filter
Top Products
72
Configuring Your Phone’s USB Settings
This menu selects the method of communication for the USB
port.
Note:
The Bluetooth feature
must first be disabled before initiating a USB
connection
with the phone. Prior to connecting the USB cable to the
phone, install the latest version of the PC Studio application. This
application installs the necessary USB drivers onto your machine. For a
free download of PC Studio, go to www.samsung.com/us/support.
1. From Idle mode, touch ➔
Settings
➔
Connectivity
➔
Select USB Mode
.
2. Select one of the following USB modes:
• Ask on Connection
: causes the phone to present a “Select USB
Mode” pop-up when you connect to the PC. You can then choose
from either:
PC Studio
,
Media Player
, or
Mass Storage
.
• Samsung PC Studio
: sets PC Studio to launch as the default
application when a USB connection is detected.
• Media Player
: sets the Media Player to launch as the default
application when a USB connection is detected.
• Mass Storage
: allows you to utilize the onboard storage capacity of
the phone to store and upload files. This option allows your
computer to detect the phone as a removable storage drive.
3. Touch .
Network Profile Configuration
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via either one of three
available WAP browsers: MEdia Net, AT&T MMS (MultiMedia
Server), and AT&T IMS. You need these settings to use the web
browser or send MMS messages or Emails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
1. From Idle mode, touch ➔
Settings
➔
Connectivity
➔
Network Profiles
.
2. Touch one of these options:
•MEdia Net
• AT&T MMS
• AT&T IMS
Note:
The MEdia Net WAP and AT&T MMS are pre-configured and cannot be
altered on this screen. Your phone is set up by default for connecting to
the network.
3. To create a new connection, touch .
Save
Create