Filter
Top Products
73
Menu functions
Settings
(Menu 9)
Network
(Menu 9.6.3)
Use this menu to change the settings for connecting
to your cellular network.
•
Network selection
: select to either
automatically or manua lly select the netw ork
used when roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming
agreement between the two .
•
Network mode
: select the network you use.
Automatic
: the phone scans for available
networks.
GSM 900/1800
: the phone operates in the
combined GSM 900/1800 network.
GSM 1900
: the phone operates in the GSM
1900 network. This option is only available in
USA.
UMTS
: the phone operates in UMTS (3G
network) networks. You can get a higher speed
quality tha n on lower gener ation networks, and
use advanced data and information services,
such as video calls.
Connections
(Menu 9.6.4)
You can set up information about your network
connection. In most cases, you don’t need to change
the settings. In case of problems, please contact
your service provider.
Creating or editing a connection profile
Press <
Options
> and select
New
, or select the
connection profile you want to edit. The following
options are available:
•
Set name
: edit the name of the network sett ing.
•
Access name
: edit the access point name used
for the address of the GPRS network gateway.
•
Auth type
: choose the type of authentication
used.
•
User ID
: edit the server login ID.
•
Password
: edit the server password.
•
Protocol
: select the protocol from among
WAP
,
HTTP
, and
Other
.
•
Home URL
: enter your homepage address.
•
Proxy address
/
Port
: (for the HTTP protocol)
set the proxy server address and port.
•
Gateway address
: (for the WAP protocol) set
the gateway address.
•
Secure connection
: (for the W AP protocol) turn
the secure mode on or off.
•
Linger time (sec.)
: set a time period after
which the network is disconnected if there has
been no new data traffic in that time.
•
Advanced settings
:
provide you with the
following options:
Static IP
: specify if you want to manually enter
an IP address; see the Local phone IP option. If
you want the IP address to be automatica lly
assigned by the server, remove the check mark.